# How to Tweak the Outback Inverter
Power inverters, such as the ones manufactured and distributed by Outback, are used to convert electrical power from direct current (DC) to alternating current (AC). If you find that your inverter is not operating properly, you may need to tweak the device by manipulating the screws on the inverter's wiring compartment board. With a common household tool, you can perform this procedure.
Things You'll Need
- Flathead screwdriver
Instructions
-
-
1
Remove the cover from the inverter to expose the wiring compartment board.
-
2
Tighten the screws for any wiring system to which the inverter is connected, using your flathead screwdriver on the indicated screw.
-
3
Press the "On" or "Off" jumpers, located below the set of screws on the wiring compartment board, to manually turn the inverter on or off.
-
4
Replace the inverter's cover when you have completed tweaking the device.
-
1
Electrical Repairs
- How to Remove the Oven Wiring From a Range
- How to Get the Wiring Out of an Electric Blanket
- How to Hook Up the Wiring for a Honeywell Thermostat RTH111B
- How to Troubleshoot the Wiring for Clock Chimes
- How to Upgrade the Electrical Wiring in a House
- How to Add a Plug to the Wiring of a Dishwasher
- How to Turn on the Panasonic Inverter Microwave
- How to Troubleshoot the Wiring for a Bedroom
- How to Run Wiring for a Ceiling Light Box on the First Floor
- How to Do New Wiring Without Taking Down the Walls
- How to Disconnect the Wiring From the Socket of a Ceiling Light
- How to Change the Polarity of House Wiring
