What Nailer to Use for Tongue & Groove Paneling

- Best for thin materials like 1/4-inch or 1/2-inch tongue and groove boards.

- Uses 18-gauge brad nails 1-1/4 to 2-inch long.

2. Finish Nailer:

- Good for general carpentry and for thicker tongue and groove boards.

- Uses 15 or 16-gauge finish nails up to 2-1/2-inch long.

3. Flooring Nailer:

- Specialized tool best suited for installing tongue and groove flooring.

- Shoots angled nails to secure boards at an angle, increasing holding power.