How to Make a DIY Bald Cap for Halloween Costume

---

Materials Needed:

1. Flesh-toned stocking or thin fabric (such as nylon or spandex)

2. Craft glue or double-sided tape

3. Scissors

4. Sewing machine (optional)

5. Hairpins or hair clips (optional)

---

Steps to Make a DIY Bald Cap:

1. Measure and Cut: Measure the circumference of your head from just above the eyebrows to the back of your head, then add about an inch for seam allowance. Cut a piece of your chosen flesh-toned fabric to this measurement.

2. Create the Cap: Fold the fabric piece lengthwise twice, then cut along one side to create a long rectangular piece. Fold it again in half lengthwise, forming a long tube. Now, fold it in half again widthwise so you have a double-folded tube.

3. Sew the Ends (optional): This is not necessary if your chosen material won't fray, but you can sew the two short open edges together to form a complete tube.

4. Apply Adhesive: Lay the cap flat and apply a line of craft glue or double-sided tape along one long open edge.

5. Attach to Forehead: With the adhesive side down, place the cap on your head, starting at the center of your forehead. Gently press it down, applying pressure to secure it to your skin.

6. Tuck in Hair: Tuck any stray hairs around the edges of the cap into the cap itself or use hair clips or hairpins to secure them.

7. Blend the Edges: Use your hands or a smoothing brush to blend the edges of the cap into the skin, making sure it looks natural.

8. Makeup Enhancement (optional): Once the cap is in place, you can add makeup over it to create a natural skin tone match or to match the character you are portraying.

*Now you have a fully functional bald cap for your Halloween costume. Remember, practice makes perfect, so don't be afraid to experiment with the positioning and blending of the cap.*