How to Sew a Skillet Handle Cover

1. Gather your materials.

You will need:

• Fabric (such as cotton, canvas, or heat-resistant fabric)

• Thread

• A sewing machine or needle and thread

• Scissors

• Measuring tape

• Pins

• Iron (optional)

2. Measure the skillet handle.

Wrap the measuring tape around the skillet handle, making sure to include the width of the handle and the seam allowance. Add 1 inch to this measurement for the total length of the handle cover.

3. Cut the fabric.

Cut a rectangle of fabric that is the total length of the handle cover by 4 inches wide.

4. Fold and sew the fabric.

Fold the fabric in half lengthwise with the wrong sides together. Sew a 1/4-inch seam down the long edge, leaving the short ends open.

5. Turn the fabric right side out.

Carefully turn the fabric right side out, using a point turner or other blunt object to help push out the corners. Press flat with an iron if desired.

6. Fold and sew the top and bottom edges.

Fold the top and bottom edges of the handle cover 1/4 inch towards the wrong side and press. Fold them over again 1/4 inch and press. Stitch the hems in place.

7. Add a hanging loop (optional).

If desired, you can add a hanging loop to the handle cover. Cut a piece of fabric that is 4 inches long by 1 inch wide. Fold it in half lengthwise and sew a 1/4-inch seam down the long edge, leaving one short edge open. Turn it right side out and press flat. Sew the hanging loop to the top center of the handle cover.

8. Slide the handle cover onto the skillet handle.

Slip the handle cover over the skillet handle, making sure that the seam is facing the inside of the handle. This is done by simply slipping the cover over the handle and adjusting it so that it is centered.

9. Enjoy your new skillet handle cover!

This simple and effective heat protection will help keep your hands safe while cooking and will add a touch of style to your kitchen.