How to Make Bumper Pads for Baby Crib

Materials:

- Fabric of your choice (two coordinating patterns or colors)

- Foam or batting for padding

- Coordinating thread

- Fabric scissors or rotary cutter

- Sewing machine

- Iron

- Measuring tape

Instructions:

Step 1: Measuring and Cutting Fabric:

- Measure the dimensions of the inside of your baby crib.

- Cut the fabric into rectangular pieces that match the measurements, allowing for an extra 1 inch (2.5 cm) on all sides for seam allowances.

Step 2: Create Fabric Envelopes:

- For each bumper pad, you will need two pieces of fabric. Place the two fabric pieces right sides together and sew around three sides, leaving one side open.

Step 3: Insert Foam or Batting:

- Turn the fabric envelope inside out so the right sides are facing out.

- Insert the foam or batting into the envelope, ensuring even distribution.

Step 4: Sew the Opening Closed:

- Fold the raw edge of the open side inward and iron it flat.

- Sew the opening closed using a matching thread.

Step 5: Create Ties:

- Cut long strips of fabric for the ties.

- Fold each strip in half lengthwise and press.

- Sew a straight stitch along the folded edge to create ties.

Step 6: Attach Ties to Bumper Pads:

- Determine the desired placement of the ties along the bumper pads.

- Pin the ties to the bumper pads at the desired locations.

- Sew the ties in place using a matching thread.

Step 7: Finishing Touches:

- Trim any excess fabric or batting.

- Press the bumper pads to achieve a neat and professional look.

- Repeat steps 2 to 7 to create additional bumper pads as needed.

Your DIY bumper pads are now ready to add comfort and protection to your baby's crib. Make sure the pads are secure and properly attached to the crib to prevent any safety hazards. Enjoy your personalized and cozy crib setup!