How to Make a Folding Chair Cover Without Sewing

Making a folding chair cover without sewing is a quick and easy way to add a touch of style to your outdoor furniture. Here's a step-by-step guide on how to make a chair cover without sewing:

What You'll Need:

- Fabric of your choice (enough to cover the chair)

- Scissors

- Measuring tape

- Hemming tape

- Iron

- Pins

Step 1: Measure the Chair

1. Place the fabric on a flat surface.

2. Measure the width and height of the chair's seat.

3. Add 2 inches to both the width and height to allow for the hems.

Step 2: Cut the Fabric

1. Cut out two pieces of fabric according to the measurements you took in Step 1. These will be the front and back pieces.

Step 3: Make the Hem

1. Fold the edges of the fabric inward by 1/2 inch.

2. Press the folds with an iron.

3. Fold the edges inward again by 1/2 inch and press.

4. Apply hemming tape to the folded edges.

Step 4: Pin the Pieces Together

1. Place the front and back pieces of fabric right sides together.

2. Pin the edges of the fabric together along the sides and bottom.

Step 5: Cover the Chair

1. Place the chair cover on the chair.

2. Adjust the cover so that it fits snugly.

3. If necessary, pin the front and back pieces together at the corners to secure the cover in place.

Your folding chair cover is now ready to use! This no-sew method makes it easy to create custom covers for your outdoor chairs, adding a personal touch to your patio or garden.