How to Sew a Seatbelt Pillow

- 2 pieces of fabric (at least 18" x 9" each)

- 1/2 yard of batting or felt

- Thread

- Sewing machine or needle and thread

- Scissors

- Pins

- Measuring tape

- Rotary cutter and mat (optional)

Instructions

Step 1: Cut the fabric

- Cut two rectangles from the fabric. Each rectangle should measure 18" x 9".

- If desired, use a rotary cutter and mat to cut the fabric. This will give you a more precise cut.

Step 2: Sew the main seam

- Place two pieces with the right sides together and pin them along one of the long edges.

- Leave a 1-inch seam allowance.

- Sew along the pinned edge using a 1/2-inch seam allowance.

- Backstitch at the beginning and end of the seam.

Step 3: Turn the pillowcase inside out

- Turn the pillowcase inside out carefully, using a point turner or other blunt object to help push out the corners.

- Press flat.

Step 4: Add the batting

- Cut a piece of batting to the same size as the pillowcase.

- Insert the batting into the pillowcase, smoothing it out as needed.

Step 5: Sew the opening closed

- Fold the raw edge of the opening 1/2-inch to the inside and press.

- Pin the opening closed.

- Sew the opening closed using a 1/2-inch seam allowance.

- Backstitch at the beginning and end of the seam.

Step 6: Enjoy your new seatbelt pillow!

Your seatbelt pillow is now complete! It is a great way to add a touch of personality to your car and give yourself a more comfortable ride.