How to Install a Metalbestos Chimney Pipe

Installing a Metalbestos chimney pipe is a relatively simple task that can be completed in a few hours. However, it is important to follow the manufacturer's instructions carefully in order to ensure a safe and proper installation.

Tools and Materials Needed:

- Metalbestos chimney pipe

- Chimney cap

- Adjustable pipe wrench

- Measuring tape

- Level

- Drill

- Masonry bit

- Hammer

- Caulk

- Safety glasses

Instructions:

1. Measure and Cut the Chimney Pipe:

- Measure the length of the chimney pipe needed and cut it to size using a hacksaw. Make sure the cut is clean and straight.

2. Attach the Chimney Cap:

- Place the chimney cap on the top of the chimney pipe and secure it with the provided screws. Make sure the cap is snugly attached and there are no gaps between the cap and the pipe.

3. Install the Chimney Pipe:

- Slide the chimney pipe into the chimney opening. Make sure the pipe is fully inserted and rests securely on the chimney ledge.

4. Secure the Chimney Pipe:

- Use the pipe wrench to tighten the pipe clamp at the base of the chimney pipe. Make sure the clamp is snug and secure.

5. Level the Chimney Pipe:

- Use the level to check if the chimney pipe is level. If necessary, adjust the pipe clamp until the pipe is level.

6. Drill Holes for Lag Screws:

- Mark the locations for the lag screws on the chimney siding. Use a masonry bit to drill pilot holes for the screws.

7. Install Lag Screws:

- Hammer the lag screws into the pilot holes. Make sure the screws are snug and secure.

8. Caulk the Joints:

- Apply a bead of caulk around the joints between the chimney pipe and the chimney siding. This will help to seal any gaps and prevent water from leaking into the chimney.

9. Clean Up:

- Clean up any debris from the installation.

10. Test the Chimney:

- Light a fire in the fireplace or stove and check for proper draft. Make sure the smoke is flowing smoothly up the chimney and there are no leaks or blockages.

By following these instructions, you can safely and properly install a Metalbestos chimney pipe.