How to Build a Metal Carport

* Measuring tape

* Pencil

* Level

* Shovel

* Concrete mix

* Rebar

* Wood 2x4s

* Metal carport kit

* Drill

* Screws

* Pliers

* Safety goggles

* Gloves

Instructions

1. Prepare the Site

* Choose a level spot for the carport.

* Clear the area of any debris.

* Dig four holes for the support posts, each 12 inches deep and 8 inches wide.

2. Set the Support Posts

* Place the support posts in the holes.

* Level the posts and secure them with concrete mix.

3. Build the Frame

* Cut the 2x4s to the desired lengths.

* Assemble the frame using screws.

* Make sure the frame is square.

4. Install the Carport Kit

* Follow the instructions provided with the carport kit to install the metal panels.

* Overlap the panels by at least 1 inch.

* Secure the panels with screws.

5. Finish the Carport

* Caulk the seams between the panels.

* Paint the carport if desired.

Tips

* When digging the holes for the support posts, make sure to call your local utility company to mark the location of any underground lines.

* Be sure to level the support posts and the frame before securing them with concrete mix.

* Overlap the metal panels by at least 1 inch to ensure a weather-tight seal.

* Caulk the seams between the panels to prevent water from leaking through.

* Paint the carport if desired to protect it from the elements.